Hallowell® 48 W Extra Heavy-Duty HI-TECH® Closed Shelving, 8-Shelf Adder Unit Quick Ship
Item #: 236-1263
$269.00 / EA
You Save: $67.00 (20%)
BEST PRICE GUARANTEE
Buy More and Save!
Hallowell® 48” W Extra Heavy-Duty HI-TECH® Closed Shelving, 8-Shelf Adder Unit Quick Ship
The Hallowell® Extra Heavy-Duty HI-TECH® Closed Shelving Industrial grade steel shelving continues a tradition of quality established generations ago with the goal of providing a shelving line with the strength needed to handle most industrial applications and versatility for today’s modern facilities. Our complete line of shelving is designed and engineered to the highest standards. A full complement of accessories including full dividers, partial dividers, labelholders, swinging doors, post splices for multilevel installations and foot plates are available to complete your system.
This Extra Heavy-Duty HI-TECH® Closed Shelving ships under our quick ship program.
Shelves–Extra Heavy Duty: Formed with two ribs along the horizontal front and rear edge and are stamped on the top left corner for identification. Class 2 shelves are fabricated from extra heavy gauge cold rolled steel and have roll formed rectangular tubular shaped front and rear edges with return bends resistance welded to the under side of shelf. Welds are spaced 3” on center to provide maximum strength. Sides are triple flanged to form a channel. All four corners are lapped and resistance welded to provide a rigid corner and add extra strength to the shelf. Top surface shall be punched for attaching Shelf Dividers from left to right on 1-1/2” centers front and back, for 36” wide x 12”, 15”, 18” and 24” deep shelves. All other sizes are punched on 3” centers. Front and rear surfaces are punched for attaching accessories. Tubular front edge is designed to protect against impact loads. Used for uniformly distributed loads up to 1,200 pounds.
Adder units include:One beaded front postTwo angle back postsOne back panelOne side panelAvailable in Hallowell Gray color only
NOTE: Adder Units are not stand alone units and must be attached to Starter Units for stability.
For the full specification, please see the linked pdf document.